GEARX Logo Steel DP Worms with Keyway

steel_dp_worms_with_keyways
 Pressure angle  14-1/2
 Material  45C
 Heat treatment   -
 Tooth surface treatment   -  
 Gears surface treatment   - 
 Tooth surface finish  Milled
 Precision grade  ISO 8
THC Gear # THC Gear # Pitch No. of
Stars
PD OD d F w t Lead Angle Type Weight
(Lbs)
SWDP3-1R SWDP3-1L 3 1 4.000 4.660 1.500 4.000 0.375 0.188 446′ T1 12.20
SWDP4-1R SWDP4-1L 4 1 3.000 3.500 1.250 4.500 0.313 0.156 446′ T1 5.60
SWDP6-1R SWDP6-1L 6 1 2.000 2.330 0.875 2.500 0.188 0.094 446′ T1 1.80
SWDP6-2R SWDP6-2L 6 2 2.000 2.330 1.000 2.500 0.250 0.125 928′ T1 1.60
SWDP6-4R SWDP6-4L 6 4 2.000 2.330 1.000 4.000 0.250 0.125 1826′ T1 1.60
SWDP8-1R SWDP8-1L 8 1 1.500 1.750 0.750 1.750 0.188 0.094 446′ T1 0.64
SWDP8-2R SWDP8-2L 8 2 1.500 1.750 0.875 1.750 0.188 0.094 928′ T1 0.56
SWDP8-4R SWDP8-4L 8 4 1.500 1.750 0.875 1.750 0.188 0.094 1826′ T1 0.56
SWDP10-1R SWDP10-1L 10 1 1.250 1.450 0.625 1.375 0.188 0.094 434′ T1 0.36
SWDP10-2R SWDP10-2L 10 2 1.250 1.450 0.750 1.375 0.188 0.094 95′ T1 0.28
SWDP10-4R SWDP10-4L 10 4 1.250 1.450 0.750 1.375 0.188 0.094 1745′ T1 0.28
SWDP12-1R SWDP12-1L 12 1 1.000 1.167 0.500 1.125 0.125 0.063 446′ T1 0.17
SWDP12-2R SWDP12-2L 12 2 1.000 1.167 0.625 1.125 0.125 0.063 928′ T1 0.14
SWDP12-4R SWDP12-4L 12 4 1.000 1.167 0.625 1.125 0.125 0.063 1826′ T1 0.14
SWDP16-1R SWDP16-1L 16 1 0.625 0.750 0.250 1.000 - - 543′ T1 0.08
SWDP16-2R SWDP16-2L 16 2 0.625 0.750 0.250 1.000 - - 1119′ T1 0.09
SWDP16-4R SWDP16-4L 16 4 0.625 0.750 0.250 1.000 - - 2148′ T1 0.09
Note:
1.All dimensions are in inches.
2.Gears are also available in 20 pressure angle.

Matched Worm Gears
- Cast Iron Worm Gears: DP3-16
- Bronze Worm Gears: DP3-16

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.