GEARX LogoSteel Round Racks with Machined Ends

steel_round_racks_with_machined_ends
 Pressure angle  20
 Material  C45
 Heat treatment  Stress relief annealing 
 Tooth surface treatment  - 
 Rack surface treatment  Black oxide
 Tooth surface finish  Milled
 Precision grade  DIN 8-9
THC Rack # Module L D b H h No. of
teeth
Type Weight
(kg)
SRR1-250E 1 251.3 15 7.5 15 14.0 80 R3 0.34
SRR1.5-250E 1.5 249.8 17 9.6 17 15.5 53 R3 0.42
SRR2-250E 2 251.3 20 12.0 20 18.0 40 R3 0.55
SRR2.5-250E 2.5 251.3 25 15.0 25 22.5 32 R3 0.90
SRR3-250E 3 254.5 30 18.0 30 27.0 27 R3 1.30
SRR4-250E 4 251.3 40 24.0 40 36.0 20 R3 2.30
SRR5-250E 5 251.3 50 30.0 50 45.0 16 R3 3.80
 
SRR1-500E 1 499.5 15 7.5 15 14.0 159 R3 0.66
SRR1.5-500E 1.5 499.5 17 9.6 17 15.5 106 R3 0.84
SRR2-500E 2 502.7 20 12.0 20 18.0 80 R3 1.10
SRR2.5-500E 2.5 502.7 25 15.0 25 22.5 64 R3 1.80
SRR3-500E 3 499.5 30 18.0 30 27.0 53 R3 2.50
SRR4-500E 4 502.6 40 24.0 40 36.0 40 R3 4.50
SRR5-500E 5 502.6 50 30.0 50 45.0 32 R3 7.10
 
SRR1-1000E 1 999.0 15 7.5 15 14.0 318 R3 1.35
SRR1.5-1000E 1.5 999.0 17 9.6 17 15.5 212 R3 1.70
SRR2-1000E 2 999.0 20 12.0 20 18.0 159 R3 2.20
SRR2.5-1000E 2.5 997.5 25 15.0 25 22.5 127 R3 3.60
SRR3-1000E 3 999.0 30 18.0 30 27.0 106 R3 5.10
SRR4-1000E 4 1005.3 40 24.0 40 36.0 80 R3 9.10
SRR5-1000E 5 1005.3 50 30.0 50 45.0 64 R3 14.30
Note:
1.All dimensions are in mm.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.