GEARX Logo Steel Racks with Machined Ends and Holes

steel_racks_with_machined_ends_and_holes
 Pressure angle  20
 Material  C45
 Heat treatment  Quenched and tempered
 Tooth surface treatment   -
 Rack surface treatment   -
 Tooth surface finish  Milled
 Precision grade  DIN 8
 Racks for continuous mounting
THC Rack # Module L B H h No. of
teeth
l l1 l2 l3 b1 h1 d1 d2 d3 f No. of
holes
Type Weight
(kg)
SR2-500EB 2 502.65 25 24 22 80 440.1 31.3 125.66 62.83 7 8 7 11 5.7 2 4 R1 2.20
SR3-500EB 3 508.94 30 29 26 54 440.1 34.4 125.66 63.62 9 9 10 15 7.7 2 4 R1 3.10
SR4-500EB 4 502.65 40 39 35 40 427.7 37.5 125.66 62.83 9 12 10 15 7.7 2 4 R1 5.50
SR5-500EB 5 502.65 49 39 34 32 442.3 30.2 125.66 62.83 13 12 14 20 11.7 3 4 R1 6.80
 
SR2-1000EB 2 1005.31 25 24 22 160 942.7 31.3 125.66 62.83 7 8 7 11 5.7 2 8 R1 4.30
SR3-1000EB 3 1017.88 30 29 26 108 949.1 34.4 125.66 63.62 9 9 10 15 7.7 2 8 R1 6.20
SR4-1000EB 4 1005.31 40 39 35 80 930.3 37.5 125.66 62.83 9 12 10 15 7.7 3 8 R1 11.00
SR5-1000EB 5 1005.31 49 39 34 64 945.0 30.2 125.66 62.83 13 12 14 20 11.7 3 8 R1 13.60
 
SR2-2000EB 2 2010.62 25 24 22 320 1948.0 31.3 125.66 62.83 7 8 7 11 5.7 2 16 R1 8.60
SR3-2000EB 3 2035.75 30 29 26 216 1967.0 34.4 125.66 63.62 9 9 10 15 7.7 2 16 R1 12.40
SR4-2000EB 4 2010.62 40 39 35 160 1935.6 37.5 125.66 62.83 9 12 10 15 7.7 3 16 R1 22.00
SR5-2000EB 5 2010.62 49 39 34 128 1950.4 30.2 125.66 62.83 13 12 14 20 11.7 3 16 R1 27.20
 Note:
 1.All dimensions are in mm.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.