GEARX LogoSteel Hardened Teeth Helical Racks with Machined Ends and Holes

steel_hardened_teeth_helical_racks
 Pressure angle  20
 Hand of helix  Right
 Helix angle   19˚3142˝ 
 Material  C45
 Heat treatment   - 
 Tooth surface treatment  Induction hardened
 Rack surface treatment   -
 Tooth surface finish  Milled
 Precision grade  DIN 10
 Racks for continuous mounting
THC Rack # THC Rack # Module L L1 B H h No. of
teeth
l l1 l2 l3 b1 h1 d1 d2 d3 f No. of
holes
Type Weight
(kg)
SHR2-500RHEB SHR2-500LHEB 2 500.00 8.5 24 24 22 75 436.6 31.7 125 62.5 7 8 7 11 5.7 2 4 R2 2.10
SHR3-500RHEB SHR3-500LHEB 3 500.00 10.3 29 29 26 50 430.0 35.0 125 62.5 9 9 10 15 7.7 2 4 R2 3.00
SHR4-500RHEB SHR4-500LHEB 4 506.67 13.8 39 39 35 38 433.0 33.3 125 62.5 9 12 10 15 7.7 3 4 R2 5.30
SHR5-500RHEB SHR5-500LHEB 5 500.00 17.4 49 39 34 30 425.0 37.5 125 62.5 13 12 14 20 11.7 3 4 R2 6.50
SHR6-500RHEB SHR6-500LHEB 6 500.00 20.9 59 49 43 25 425.0 37.5 125 62.5 17 16 18 26 15.7 3 4 R2 9.90
 
SHR2-1000RHEB SHR2-1000LHEB 2 1000.00 8.5 24 24 22 150 936.6 31.7 125 62.5 7 8 7 11 5.7 2 8 R2 4.20
SHR3-1000RHEB SHR3-1000LHEB 3 1000.00 10.3 29 29 26 100 930.0 35.0 125 62.5 9 9 10 15 7.7 2 8 R2 6.00
SHR4-1000RHEB SHR4-1000LHEB 4 1000.00 13.8 39 39 35 75 933.4 33.3 125 62.5 9 12 10 15 7.7 3 8 R2 10.50
SHR5-1000RHEB SHR5-1000LHEB 5 1000.00 17.4 49 39 34 60 925.0 37.5 125 62.5 13 12 14 20 11.7 3 8 R2 13.00
SHR6-1000RHEB SHR6-1000LHEB 6 1000.00 20.9 59 49 43 50 925.0 37.5 125 62.5 17 16 18 26 15.7 3 8 R2 19.80
Note:
1.All dimensions are in mm.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.