GEARX LogoSteel Hardened Teeth Helical Racks with Machined Ends

steel_hardened_teeth_helical_racks 
 Pressure angle  20
 Hand of helix  Right  
 Helix angle   19˚3142˝ 
 Material  C45
 Heat treatment   - 
 Tooth surface treatment  Induction hardened
 Rack surface treatment   -
 Tooth surface finish  Milled
 Precision grade  DIN 10
 Racks for continuous mounting
THC Rack # THC Rack # Modul L L1 B H h f No. of
teeth
Type Weight
(kg)
SHR2-200RHE SHR2-200LHE 2 200.00 8.5 24 24 22   30 R2 0.84
SHR3-200RHE SHR3-200LHE 3 200.00 10.3 29 29 26   20  R2 1.20
SHR4-200RHE SHR4-200LHE 4 200.00 13.8 39 39 35   15  R2 2.10
SHR5-200RHE SHR5-200LHE 5 200.00 17.4 49 39 34   12  R2 2.60
SHR6-200RHE SHR6-200LHE 6 200.00 20.9 59 49 43   10  R2 3.96
 
SHR2-500RHE SHR2-500LHE 2 500.00 8.5 24 24 22 2 75 R2 2.10
SHR3-500RHE SHR3-500LHE 3 500.00 10.3 29 29 26 2 75 R2 3.00
SHR4-500RHE SHR4-500LHE 4 506.67 13.8 39 39 35 3 38 R2 5.30
SHR5-500RHE SHR5-500LHE 5 500.00 17.4 49 39 34 3 30 R2 6.50
SHR6-500RHE SHR6-500LHE 6 500.00 20.9 59 49 43 3 25 R2 9.90
 
SHR2-1000RHE SHR2-1000LHE 2 1000.00 8.5 24 24 22 2 150 R2 4.20
SHR3-1000RHE SHR3-1000LHE 3 1000.00 10.3 29 29 26 2 100 R2 6.00
SHR4-1000RHE SHR4-1000LHE 4 1000.00 13.8 39 39 35 3 75 R2 10.50
SHR5-1000RHE SHR5-1000LHE 5 1000.00 17.4 49 39 34 3 60 R2 13.00
SHR6-1000RHE SHR6-1000LHE 6 1000.00 20.9 59 49 43 3 50 R2 19.80
Note:
1.All dimensions are in mm.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.