GEARX Logo Steel Hardened Teeth CP Racks with Machined Ends and Holes

steel_hardened_teeth_cp_racks_with_machined_ends_and_holes
 Pressure angle  20°
 Material  C45
 Heat treatment  Induction hardened
 Tooth surface treatment   -
 Rack surface treatment   - 
 Tooth surface finish  Milled
 Precision grade  DIN 9
 Racks for continuous mounting
THC Rack # Pitch L B H h No. of
 teeth
l1 l2 l3 b1 h1 d1 d2 f No. of
 holes
Type Weight
(kg)
SRCP10-800HEB 10 800 29 29 25.82 80 25 25 100 9 11.5 9 15 2 10 R1 4.80
SRCP12.5-800HEB 12.5 800 39 39 35.02 64 25 25 100 9 11.5 9 15 2 10 R1 9.80
SRCP16-800HEB 16 800 49 49 43.91 50 25 25 100 9 11.5 9 15 2 10 R1 14.20
SRCP20-800HEB 20 800 59 59 52.63 40 25 25 100 9 11.5 9 15 2 10 R1 20.20
SRCP25-800HEB 25 800 79 79 71.04 32 25 25 100 9 11.5 9 15 2 10 R1 35.70
 
SRCP10-1200HEB 10 1200 29 29 25.82 120 25 25 100 9 11.5 9 15 2 14 R1 7.20
SRCP12.5-1200HEB 12.5 1200 39 39 35.02 96 25 25 100 9 11.5 9 15 2 14 R1 13.50
SRCP16-1200HEB 16 1200 49 49 43.91 75 25 25 100 9 11.5 9 15 2 14 R1 21.20
SRCP20-1200HEB 20 1200 59 59 52.63 60 25 25 100 9 11.5 9 15 2 14 R1 30.30
SRCP25-1200HEB 25 1200 79 79 71.04 48 25 25 100 9 11.5 9 15 2 14 R1 53.60
 
SRCP10-2000HEB 10 2000 29 29 25.82 200 25 25 100 9 11.5 9 15 2 22 R1 12.00
SRCP12.5-2000HEB 12.5 2000 39 39 35.02 160 25 25 100 11 14.0 11 18 2 22 R1 22.50
SRCP16-2000HEB 16 2000 49 49 43.91 125 25 25 100 13 24.0 14 20 2 22 R1 35.30
SRCP20-2000HEB 20 2000 59 59 52.63 100 25 25 100 13 29.0 14 20 2 22 R1 50.50
SRCP25-2000HEB 25 2000 79 79 71.04 80 25 25 100 18 39.0 18 26 2 22 R1 89.30
Note:
1.All dimensions are in mm.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.