GEARX LogoSteel CP Racks with Machined Ends and Holes

steel_cp_racks_with_machined_ends_and_holes
 Pressure angle  20°
 Material  C45
 Heat treatment  Stress relief annealing
 Tooth surface treatment   -
 Rack surface treatment  Black oxide
 Tooth surface finish  Milled
 Precision grade  DIN 8
 Racks for continuous mounting
THC Rack # Pitch L B H h No. of
 teeth
l1 l2 b1 h1 d1 d2 No. of
 holes
Type Weight
(kg)
SRCP5-1000EB 5 1000 15 20 18.41 200 50 180 6 8 6 10 6 R1 2.10
SRCP10-1000EB 10 1000 30 35 31.82 100 50 180 11 14 11 18 6 R1 7.40
SRCP15-1000EB 15 1005 50 50 45.23 67 62.5 220 16 20 16 23 5 R1 17.20
SRCP20-1000EB 20 1000 60 60 53.63 50 60 220 18 23 18 26 5 R1 24.20
 
SRCP5-1500EB 5 1500 15 20 18.41 300 30 180 6 8 6 10 9 R1 3.20
SRCP10-1500EB 10 1500 30 35 31.82 150 30 180 11 14 11 18 9 R1 11.00
SRCP15-1500EB 15 1500 50 50 45.23 100 90 220 16 20 16 23 7 R1 25.70
SRCP20-1500EB 20 1500 60 60 53.63 75 90 220 18 23 18 26 7 R1 36.40
 
SRCP5-2000EB 5 2050 15 20 18.41 410 35 180 6 8 6 10 12 R1 4.40
SRCP10-2000EB 10 2050 30 35 31.82 205 35 180 11 14 11 18 12 R1 15.10
SRCP15-2000EB 15 2040 50 50 45.23 136 30 220 16 20 16 23 10 R1 34.80
SRCP20-2000EB 20 2040 60 60 53.63 102 30 220 18 23 18 26 10 R1 49.40
Note:
1.All dimensions are in mm.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.