GEARX Logo Steel Hardened and Ground Teeth Pinion Shafts

steel_hardened_and_ground_teeth_pinion_shafts
 Pressure angle  20°
 Material  C45
 Heat treatment   -
 Tooth surface treatment  Induction hardened 
 Gears surface treatment   - 
 Tooth surface finish  Ground
 Precision grade  DIN 7
THC Gear # Module  No. of
Teeth
PD OD d F L l1 l2 Type
SP1.5-10HG 1.5 10 15.00 19.35 12.20 15 140 25 100 T2
SP1.5-11HG 1.5 11 16.50 20.85 13.70 15 140 25 100 T2
SP1.5-12HG 1.5 12 18.00 21.00 13.70 15 140 25 100 T2
SP1.5-13HG 1.5 13 19.50 22.50 15.20 15 140 25 100 T2
SP2-10HG 2.0 10 20.00 25.80 16.20 20 170 30 120 T2
SP2-11HG 2.0 11 22.00 27.80 18.20 20 170 30 120 T2
SP2-12HG 2.0 12 24.00 28.00 18.20 20 170 30 120 T2
SP2-13HG 2.0 13 26.00 30.00 20.20 20 170 30 120 T2
SP2.5-10HG 2.5 10 25.00 32.25 20.20 25 195 35 135 T2
SP2.5-11HG 2.5 11 27.50 34.75 22.70 25 195 35 135 T2
SP2.5-12HG 2.5 12 30.00 35.00 22.70 25 195 35 135 T2
SP2.5-13HG 2.5 13 32.50 37.50 25.20 25 195 35 135 T2
SP3-10HG 3.0 10 30.00 38.70 24.20 30 220 40 150 T2
SP3-11HG 3.0 11 33.00 41.70 27.20 30 220 40 150 T2
SP3-12HG 3.0 12 36.00 42.00 27.20 30 220 40 150 T2
SP3-13HG 3.0 13 39.00 45.00 30.20 30 220 40 150 T2
Note:
1.All dimensions are in mm.
2.Gears are also available in 14-1/2° pressure angle.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.