GEARX Logo Steel Hardened and Ground Teeth DP Crossed Helical Gears with Keyway

steel_hardened_and_ground_teeth_crossed_helical_gears
 Pressure angle  14-1/2
 Hand of helix  Right  
 Helix angle   45˚ 
 Material  C45 
 Heat treatment  Induction hardened 
 Tooth surface treatment   - 
 Gears surface treatment   - 
 Tooth surface finish  Ground
 Precision grade  DIN 6
THC Gear # THC Gear # Pitch No. of
Teeth
PD d D F P w t Type
SCDP6-8RHG SCDP6-8LHG 6 8 1.333 0.625 1.00 1.000 0.75 0.125 0.063 T2
SCDP6-9RHG SCDP6-9LHG 6 9 1.500 0.750 1.18 1.000 0.75 0.188 0.094 T2
SCDP6-10RHG SCDP6-10LHG 6 10 1.667 0.750 1.34 1.000 0.75 0.188 0.094 T2
SCDP6-12RHG SCDP6-12LHG 6 12 2.000 1.000 1.62 1.000 0.75 0.250 0.125 T2
SCDP6-15RHG SCDP6-15LHG 6 15 2.500 1.250 2.00 1.000 0.75 0.313 0.156 T2
SCDP6-18RHG SCDP6-18LHG 6 18 3.000 1.250 2.25 1.000 0.75 0.313 0.156 T2
SCDP6-20RHG SCDP6-20LHG 6 20 3.333 1.250 2.50 1.000 0.75 0.313 0.156 T2
SCDP6-24RHG SCDP6-24LHG 6 24 4.000 1.250 2.50 1.000 0.75 0.313 0.156 T2
SCDP6-30RHG SCDP6-30LHG 6 30 5.000 1.250 2.50 1.000 0.75 0.313 0.156 T2
SCDP6-36RHG SCDP6-36LHG 6 36 6.000 1.250 2.50 1.000 0.75 0.313 0.156 T2
SCDP8-8RHG SCDP8-8LHG 8 8 1.000 0.50 0.75 0.750 0.50 0.125 0.063 T2
SCDP8-10RHG SCDP8-10LHG 8 10 1.250 0.625 1.00 0.750 0.50 0.125 0.063 T2
SCDP8-12RHG SCDP8-12LHG 8 12 1.500 0.750 1.25 0.750 0.50 0.188 0.094 T2
SCDP8-16RHG SCDP8-16LHG 8 16 2.000 1.000 1.62 0.750 0.50 0.250 0.125 T2
SCDP8-20RHG SCDP8-20LHG 8 20 2.500 1.000 2.00 0.750 0.50 0.250 0.125 T2
SCDP8-24RHG SCDP8-24LHG 8 24 3.000 1.000 2.00 0.750 0.50 0.250 0.125 T2
SCDP8-32RHG SCDP8-32LHG 8 32 4.000 1.000 2.00 0.750 0.50 0.250 0.125 T2
SCDP8-40RHG SCDP8-40LHG 8 40 5.000 1.000 2.00 0.750 0.50 0.250 0.125 T2
SCDP8-48RHG SCDP8-48LHG 8 48 6.000 1.000 2.25 0.750 0.50 0.250 0.125 T2
SCDP10-8RHG SCDP10-8LHG 10 8 0.800 0.375 0.63 0.875 0.38 0.093 0.047 T2
SCDP10-10RHG SCDP10-10LHG 10 10 1.000 0.500 0.81 0.875 0.38 0.125 0.063 T2
SCDP10-12RHG SCDP10-12LHG 10 12 1.200 0.625 1.00 0.875 0.38 0.125 0.063 T2
SCDP10-15RHG SCDP10-15LHG 10 15 1.500 0.750 1.31 0.875 0.38 0.188 0.094 T2
SCDP10-20RHG SCDP10-20LHG 10 20 2.000 0.750 1.81 0.875 0.38 0.188 0.094 T2
SCDP10-25RHG SCDP10-25LHG 10 25 2.500 0.750 2.31 0.875 0.38 0.188 0.094 T2
SCDP10-30RHG SCDP10-30LHG 10 30 3.000 0.750 2.50 0.875 0.38 0.188 0.094 T2
SCDP10-40RHG SCDP10-40LHG 10 40 4.000 0.750 2.50 0.875 0.38 0.188 0.094 T2
SCDP12-12RHG SCDP12-12LHG 12 12 1.000 0.625 0.84 0.750 0.50 0.125 0.063 T2
SCDP12-15RHG SCDP12-15LHG 12 15 1.250 0.625 1.09 0.750 0.50 0.188 0.094 T2
SCDP12-18RHG SCDP12-18LHG 12 18 1.500 0.625 1.34 0.750 0.50 0.188 0.094 T2
SCDP12-24RHG SCDP12-24LHG 12 24 2.000 0.625 1.84 0.750 0.50 0.188 0.094 T2
SCDP12-30RHG SCDP12-30LHG 12 30 2.500 0.625 2.31 0.750 0.50 0.188 0.094 T2
SCDP12-36RHG SCDP12-36LHG 12 36 3.000 0.625 2.50 0.750 0.50 0.188 0.094 T2
SCDP16-16RHG SCDP16-16LHG 16 16 1.000 0.500 0.86 0.500 0.50 1.250 0.625 T2
SCDP16-20RHG SCDP16-20LHG 16 20 1.250 0.500 1.14 0.500 0.50 1.250 0.625 T2
SCDP16-24RHG SCDP16-24LHG 16 24 1.500 0.500 1.39 0.500 0.50 0.188 0.094 T2
SCDP16-32RHG SCDP16-32LHG 16 32 2.000 0.500 1.89 0.500 0.50 0.188 0.094 T2
SCDP16-40RHG SCDP16-40LHG 16 40 2.500 0.500 2.31 0.500 0.50 0.188 0.094 T2
SCDP16-48RHG SCDP16-48LHG 16 48 3.000 0.500 2.50 0.500 0.50 0.188 0.094 T2
Note:
1.All dimensions are in inches.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.