GEARX Logo Steel DP Internal Gears

steel_internal_gears
 Pressure angle  14-1/2
 Material  C45
 Heat treatment   -
 Tooth surface treatment   - 
 Gears surface treatment   - 
 Tooth surface finish  Milled
 Precision grade  DIN 8
THC Gear # Pitch No. of
Teeth
PD OD d F Type
SIDP16-32 16 32 2.00 2.75 1.962 0.313 T1
SIDP16-48 16 48 3.00 3.75 2.962 0.313 T1
SIDP16-64 16 64 4.00 4.75 3.962 0.313 T1
SIDP16-96 16 96 6.00 6.75 5.962 0.313 T1
SIDP24-36 24 36 1.50 2.25 1.474 0.250 T1
SIDP24-48 24 48 2.00 2.75 1.974 0.250 T1
SIDP24-72 24 72 3.00 3.75 2.974 0.250 T1
SIDP24-96 24 96 4.00 4.75 3.974 0.250 T1
SIDP24-144 24 144 6.00 6.75 5.974 0.250 T1
SIDP32-48 32 48 1.50 2.00 1.480 0.188 T1
SIDP32-64 32 64 2.00 2.75 1.980 0.188 T1
SIDP32-96 32 96 3.00 3.75 2.980 0.188 T1
SIDP32-128 32 128 4.00 4.75 2.980 0.188 T1
SIDP32-192 32 192 6.00 6.75 5.980 0.188 T1
SIDP48-48 48 48 1.00 1.50 0.986 0.125 T1
SIDP48-72 48 72 1.50 2.00 1.486 0.125 T1
SIDP48-96 48 96 2.00 2.75 1.986 0.125 T1
SIDP48-144 48 144 3.00 3.75 2.986 0.125 T1
Note:
1.All dimensions are in inches.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.