GEARX Logo Stainless Steel Pinion Shafts

steel_stainless_pinion_shafts
 Pressure angle  20°
 Material  SS303
 Heat treatment   -
 Tooth surface treatment   - 
 Gears surface treatment   - 
 Tooth surface finish  Milled
 Precision grade  DIN 8
THC Gear # Module  No. of
Teeth
PD OD d F L I Type
SSP0.25-15 0.25 15 3.75 4.25 3 2.5 38 18 T1
SSP0.25-18 0.25 18 4.50 5.00 3 2.5 38 18 T1
SSP0.3-16 0.30 16 4.80 5.40 3 2.5 38 18 T1
SSP0.3-20 0.30 20 6.00 6.60 3 2.5 38 18 T1
SSP0.4-18 0.40 18 7.20 8.00 5 3.0 47 22 T1
SSP0.4-27 0.40 27 10.80 11.60 5 3.0 47 22 T1
SSP0.5-16 0.50 16 8.00 9.00 6 3.0 47 22 T1
SSP0.5-20 0.50 20 10.00 11.00 6 3.0 47 22 T1
SSP0.5-24 0.50 24 12.00 13.00 6 3.0 47 22 T1
SSP0.8-15 0.80 15 12.00 13.60 8 5.0 59 27 T1
SSP0.8-16 0.80 16 12.80 14.40 8 5.0 59 27 T1
SSP0.8-18 0.80 18 14.40 16.00 8 5.0 59 27 T1
SSP1-14 1.00 14 14.00 16.00 10 8.0 68 30 T1
SSP1-16 1.00 16 16.00 18.00 10 8.0 68 30 T1
SSP1-20 1.00 20 20.00 22.00 10 8.0 68 30 T1
SSP1.25-12 1.25 12 15.00 17.50 12 10.0 90 40 T1
SSP1.25-15 1.25 15 18.75 21.25 12 10.0 90 40 T1
SSP1.25-18 1.25 18 22.50 25.00 12 10.0 90 40 T1
SSP1.5-13 1.50 13 19.50 22.50 15 12.0 140 64 T1
SSP1.5-16 1.50 16 24.00 27.00 15 12.0 140 64 T1
SSP1.5-20 1.50 20 30.00 33.00 15 12.0 140 64 T1
SSP2-13 2.00 13 26.00 30.00 20 20.0 132 56 T1
SSP2-16 2.00 16 32.00 36.00 20 20.0 132 56 T1
SSP2-18 2.00 18 36.00 40.00 20 20.0 132 56 T1
Note:
1.All dimensions are in mm.
2.Gears are also available in 14-1/2° pressure angle.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.