GEARX Logo Steel Hardened Teeth Spiral Bevel Gears 1:4

steel_hardened_teeth_spiral_bevel_gears
 Pressure angle  20°
 Helix angle  35°
 Material  C45
 Heat treatment   -
 Tooth surface treatment  Induction hardened  
 Gears surface treatment   - 
 Tooth surface finish  Milled
 Precision grade  DIN 8
THC Gear # Module  No. of
Teeth
PD OD d D F H h h1 Type
S.SB1.5-60-4RH 1.5 60 90.0 90.36 12 60 12 32 24.08 12.00 T2
S.SB1.5-15-4LH 1.5 15 22.5 26.09 8 18 12 56 22.95 10.43 T2
S.SB2-60-4RH 2.0 60 120.0 120.46 15 80 16 42 31.50 16.00 T2
S.SB2-15-4LH 2.0 15 30.0 34.68 10 24 16 75 30.94 14.25 T2
S.SB2.5-60-4RH 2.5 60 150.0 150.50 20 100 20 53 39.68 20.00 T2
S.SB2.5-15-4LH 2.5 15 37.5 44.16 12 30 20 94 38.90 18.06 T2
S.SB3-60-4RH 3.0 60 180.0 180.57 20 120 22 64 47.61 25.00 T2
S.SB3-15-4LH 3.0 15 45.0 52.64 15 38 22 112 44.01 21.12 T2
Note:
1.All dimensions are in mm.
2.Gears are also available in 14-1/2° pressure angle.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.