GEARX Logo Steel Hardened Teeth Spiral Bevel Gears 1:3

steel_hardened_teeth_spiral_bevel_gears
 Pressure angle  20°
 Helix angle  35°
 Material  C45
 Heat treatment   -
 Tooth surface treatment  Induction hardened  
 Gears surface treatment   - 
 Tooth surface finish  Milled
 Precision grade  DIN 8
THC Gear # Module  No. of
Teeth
PD OD d D F H h h1 Type
S.SB2-45-3RH 2.0 45 90.0 90.67 12 40 15 40 30.29 17.00 T2
S.SB2-15-3LH 2.0 15 30.0 34.78 10 24 15 60 29.66 14.00 T2
S.SB2.5-45-3RH 2.5 45 112.5 113.32 15 50 20 50 38.25 22.00 T2
S.SB2.5-15-3LH 2.5 15 37.5 43.36 12 30 20 75 38.27 17.50 T2
S.SB3-45-3RH 3.0 45 135.0 135.99 20 60 23 55 40.59 20.00 T2
S.SB3-15-3LH 3.0 15 45.0 52.08 15 38 23 90 44.98 21.33 T2
S.SB4-45-3RH 4.0 45 180.0 181.30 20 80 30 70 50.62 24.00 T2
S.SB4-15-3LH 4.0 15 60.0 69.30 16 50 30 115 54.37 23.33 T2
S.SB5-45-3RH 5.0 45 225.0 226.61 30 90 35 75 50.05 20.00 T2
S.SB5-15-3LH 5.0 15 75.0 86.55 20 60 35 145 66.89 30.00 T2
Note:
1.All dimensions are in mm.
2.Gears are also available in 14-1/2° pressure angle.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.