GEARX Logo Steel Hardened and Ground Teeth Spiral Bevel Gears 1:2

steel_hardened_and_ground_teeth_spiral_gears
 Pressure angle  20°
 Helix angle  35°
 Material  C45
 Heat treatment   -
 Tooth surface treatment  Induction hardened  
 Gears surface treatment   - 
 Tooth surface finish  Ground
 Precision grade  DIN 6
THC Gear # Module  No. of
Teeth
PD OD d D F H h h1 Type
S.SB2-40-2RHG 2.0 40 80.0 81.00 12 40 15 45 32.26 18.00 T2
S.SB2-20-2LHG 2.0 20 40.0 44.10 12 32 15 60 34.00 18.00 T2
S.SB2.5-40-2RHG 2.5 40 100.0 101.27 15 50 20 55 39.65 20.00 T2
S.SB2.5-20-2LHG 2.5 20 50.0 55.20 12 40 20 75 43.61 22.50 T2
S.SB3-40-2RHG 3.0 40 120.0 121.48 20 60 22 65 45.76 24.00 T2
S.SB3-20-2LHG 3.0 20 60.0 66.07 16 50 22 90 50.63 27.50 T2
S.SB4-40-2RHG 4.0 40 160.0 162.07 20 70 28 80 48.99 28.00 T2
S.SB4-20-2LHG 4.0 20 80.0 88.50 20 60 28 120 50.45 35.00 T2
Note:
1.All dimensions are in mm.
2.Gears are also available in 14-1/2° pressure angle.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.