GEARX Logo Steel DP Bevel Gears 1:4

steel_bevel_gears
 Pressure angle  20
 Material  C45
 Heat treatment   -
 Tooth surface treatment   - 
 Gears surface treatment   - 
 Tooth surface finish  Milled
 Precision grade  ISO 8
THC Gear # Pitch No. of
Teeth
PD OD d D F H h h1 Type Weight
(Lbs)
SBDP4-56-4 4 56 14.00 14.07 1.250 4.250 1.69 4.250 2.875 1.625 T3 48.70
SBDP4-14-4 4 14 3.50 4.20 1.125 3.250 1.69 9.000 3.547 1.938 T3 7.60
SBDP5-60-4 5 60 12.00 12.05 1.250 4.000 1.70 3.750 2.625 1.563 T3 31.20
SBDP5-15-4 5 15 3.00 3.56 1.000 2.500 1.70 7.500 3.203 1.438 T3 5.00
SBDP6-60-4 6 60 10.00 10.04 1.125 3.250 1.21 3.250 2.250 1.375 T3 17.60
SBDP6-15-4 6 15 2.50 2.97 1.000 2.250 1.21 6.750 2.969 1.719 T3 3.30
SBDP8-64-4 8 64 8.00 8.03 1.000 2.750 0.84 2.750 1.875 1.250 T3 9.70
SBDP8-16-4 8 16 2.00 2.35 0.875 1.875 0.84 5.250 2.094 1.219 T3 1.30
SBDP8-72-4 8 72 9.00 9.03 1.125 3.000 1.22 3.250 2.313 1.688 T3 12.30
SBDP8-18-4 8 18 2.25 2.60 0.875 2.125 1.22 5.750 2.469 1.219 T3 1.90
SBDP10-60-4 10 60 6.00 6.03 0.875 2.500 0.72 1.250 1.625 1.125 T3 4.60
SBDP10-15-4 10 15 1.50 1.78 0.625 1.438 0.72 3.875 1.516 0.844 T3 0.60
SBDP12-72-4 12 72 6.00 6.02 0.750 2.000 0.60 2.000 1.313 0.953 T3 3.10
SBDP12-18-4 12 18 1.50 1.73 0.500 1.250 0.60 3.750 1.609 0.719 T3 0.40
SBDP16-64-4 16 64 4.00 4.02 0.625 2.250 0.48 1.375 0.891 0.563 T3 1.60
SBDP16-16-4 16 16 1.00 1.17 0.500 0.813 0.48 2.500 0.984 0.469 T3 0.10
Note:
1.All dimensions are in inches.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.