GEARX Logo Steel DP Bevel Gears 1:2

steel_bevel_gears
 Pressure angle  20°
 Material  C45
 Heat treatment   -
 Tooth surface treatment   - 
 Gears surface treatment   - 
 Tooth surface finish  Milled
 Precision grade  ISO 8
THC Gear # Pitch No. of
Teeth
PD OD d D F H h h1 Type Weight
(Lbs)
SBDP3-30-2 3 30 10.00 10.19 1.250 5.000 1.87 5.500 3.594 2.000 T3 39.90
SBDP3-15-2 3 15 5.00 5.80 1.125 3.750 1.87 7.250 4.031 1.938 T3 13.70
SBDP4-32-2 4 32 8.00 8.10 1.125 3.750 1.40 4.250 2.688 1.563 T3 17.60
SBDP4-16-2 4 16 4.00 4.60 1.125 3.250 1.40 6.000 3.344 1.813 T3 7.50
SBDP5-30-2 5 30 6.00 6.12 1.125 3.250 1.04 3.500 2.250 1.375 T3 8.90
SBDP5-15-2 5 15 3.00 3.48 1.000 2.625 1.04 4.375 2.391 1.281 T3 3.10
SBDP6-36-2 6 36 6.00 6.10 1.125 3.250 1.06 3.500 2.250 1.500 T3 8.40
SBDP6-18-2 6 18 3.00 3.42 1.000 2.500 1.06 4.750 2.766 1.625 T3 3.40
SBDP6-42-2 6 42 7.00 7.10 1.125 3.500 1.05 3.750 2.297 1.500 T3 11.40
SBDP6-21-2 6 21 3.50 3.90 1.000 2.500 1.05 5.000 2.359 1.250 T3 3.80
SBDP6-48-2 6 48 8.00 8.10 1.125 3.250 1.17 3.438 1.891 1.000 T3 11.80
SBDP6-24-2 6 24 4.00 4.40 1.000 2.625 1.17 5.438 2.547 1.250 T3 4.90
SBDP8-40-2 8 40 5.00 5.07 1.000 3.000 0.82 2.875 1.844 1.250 T3 5.00
SBDP8-20-2 8 20 2.50 2.80 0.875 2.125 0.82 4.000 2.281 1.406 T3 3.00
SBDP10-40-2 10 40 4.00 4.06 0.875 3.000 0.71 2.500 1.688 1.188 T3 3.70
SBDP10-20-2 10 20 2.00 2.24 0.750 1.750 0.71 3.125 1.797 1.063 T3 0.90
SBDP10-50-2 10 50 5.00 5.06 0.750 2.000 0.70 2.625 1.594 1.000 T3 3.60
SBDP10-25-2 10 25 2.50 2.74 0.750 2.000 0.70 3.375 1.547 0.750 T3 1.20
SBDP12-36-2 12 36 3.00 3.05 0.625 1.438 0.46 1.500 0.875 0.500 T3 1.40
SBDP12-18-2 12 18 1.50 1.70 0.500 1.250 0.46 2.250 1.203 0.688 T3 0.40
SBDP12-48-2 12 48 4.00 4.05 0.625 1.625 0.59 2.000 1.172 0.750 T3 1.50
SBDP12-24-2 12 24 2.00 2.20 0.500 1.500 0.59 2.875 1.438 0.750 T3 0.80
SBDP14-28-2 14 28 2.00 2.04 0.500 1.625 0.35 1.375 0.938 0.656 T3 0.50
SBDP14-14-2 14 14 1.00 1.17 0.500 0.813 0.35 1.625 0.969 0.563 T3 0.10
SBDP16-24-2 16 24 1.50 1.54 0.500 1.000 0.19 1.000 0.625 0.438 T3 0.20
SBDP16-12-2 16 12 0.75 0.91 0.375 0.656 0.19 1.125 0.578 0.344 T3 0.10
SBDP16-32-2 16 32 2.00 2.04 0.500 1.125 0.35 1.188 0.766 0.500 T3 0.20
SBDP16-16-2 16 16 1.00 1.15 0.375 0.813 0.35 1.500 0.844 0.438 T3 0.10
Note:
1.All dimensions are in inches.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.