GEARX Logo Steel DP Bevel Gears 1:1.5

steel_bevel_gears
 Pressure angle  20
 Material  C45
 Heat treatment   -
 Tooth surface treatment   - 
 Gears surface treatment   - 
 Tooth surface finish  Milled
 Precision grade  ISO 8
THC Gear # Pitch No. of
Teeth
PD OD d D F H h h1 Type Weight
(Lbs)
SBDP10-30-1.5 10 30 3.00 3.08 0.750 2.500 0.57 2.250 1.438 1.000 T3 1.70
SBDP10-20-1.5 10 20 2.00 2.21 0.750 1.750 0.57 2.500 1.516 0.906 T3 0.80
SBDP12-27-1.5 12 27 2.25 2.32 0.500 1.500 0.41 1.750 1.125 0.781 T3 0.60
SBDP12-18-1.5 12 18 1.50 1.67 0.500 1.250 0.41 1.875 1.125 0.656 T3 0.20
SBDP16-24-1.5 16 24 1.50 1.55 0.500 1.125 0.25 1.188 0.750 0.563 T3 0.20
SBDP16-16-1.5 16 16 1.00 1.13 0.375 1.188 0.25 1.250 0.734 0.438 T3 0.10
Note:
1.All dimensions are in inches.

Racks | Cylindrical Gears | Bevel Gears | Worm and Worm Gears | Non Circular Gears
Home | Special Application Gears | Read Before InquireGear Info | Site Map
Tel: 86-10-6492-5308 | Fax: 86-10-6492-5744 | E-Mail "GEARX"

Remember to bookmark this web site for your future convenience!
Copyright by Beijing GEARX Limited. All rights reserved.